POULTRY CAGE

Heavy coating Galvanized steel wire and heavy coating Zinc-Aluminum 10% is suitable for making chicken cages. It provides long lasting protection under humid and acidic conditions from chicken drops. It also has high strength and can withstand abrasion from sharp chicken nails.

Prominent points

Smooth surface
Zn-Al 10% coated provide extra corrosion resistance against wet , humid and chemicals.
Good weldability
Good ductility and formability
Meets your required tensile strength
Durable intermetallic layer of Zn-Al-Fe prevent scratches from chicken's nails.

Product features

Diameter

2.00 mm. – 5.00 mm.
or as customer requires

Zn-Al 10% Coating

Two types of coating class
or as customer requires
• Medium coating 120-200gsm
• Heavy coating 275 gsm.

Tensile strength

Two types of strength
• Soft tensile 400-500 MPa
• Hard tensile 500-850 MPa

Coil Weight

Two types of package
• Stadard small coil available at 50kg ,100kg ,200kg.
• Jumbo compacted coil available at 500 to 1000kg.

RUST PROTECTION MECHANISM

Zinc give an active sacrificial , aluminium provides passive protection to slow down the sacrificial reaction of zinc

Hot-dipped Zinc Aluminium Coating

ZnAI 10% by SENTEC has a longer service life than normal steel wire

The salt spray test between ZnAI 10% by SENTEC and
Galfan ZnAI 5%, Zn Heavy Coating และ Zn Light Coating

The salt spray test between ZnAI 10% by SENTEC and Galfan ZnAI 5%, Zn Heavy Coating และ Zn Light Coating

18 times more durable

Salt Spray Test according to ASTM B117 after 960 hours of testing

Corrosion test results of
various types of inc-coating wire

More Durable
More Economical

With technology from Japan, we develop products to meet the needs of the production of chicken cages that require superior durability against corrode environment in checken farm. The ZnAl 10% wire lasts 3 times (Compared to between ZnAI 10%/Zinc heavy coating) in case of the same coating rate

QUALITY STANDARDS

Develop an advance metallic coating technology of Zinc-Aluminium 10% we meets coating weight requirement of BS 10244-2 (class A and B), ISO 7989-2 (class A and B), ASTM A856 (class A) AS/NZS 4534 (class W05 and W10)

Thai Industrial Standards

The product has been certified Made in Thailand (MiT) by the Federation of Thai Industries and have been certified for the quality management system ISO 9001:2015 by the Management System Certification Institute(Thailand).